 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TES 1 Series, 1 Watt Features Small SMD package with standard footprint I/O- isolation 1500 VDC Single and dual output models Input voltage 5, 12 and 24 VDC High efficiency up to 80% Operating temperature range -40 to +85C High accuracy of pin co-planarity Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020C Available in tape and reel package 3 year product warranty With their small footprint these 1Watt DC/DC converters are an ideal and economical solution for many applications where an isolated voltage is required. Typical applications are ground loop elimination, noise reduction, voltage isolation in digital interfaces and voltage conversion in distributed power systems. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. For automated SMD production lines the devices can be supplied in standard tape and reel package. Models Order code TES 1-0511 TES 1-0519 TES 1-0512 TES 1-0513 TES 1-0521 TES 1-0522 TES 1-0523 TES 1-1211 TES 1-1219 TES 1-1212 TES 1-1213 TES 1-1221 TES 1-1222 TES 1-1223 TES 1-2411 TES 1-2419 TES 1-2412 TES 1-2413 TES 1-2421 TES 1-2422 TES 1-2423 http://www.tracopower.com 24 VDC 10% 12 VDC 10% 5 VDC 10% Input voltage Output voltage 5 VDC 9 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 5 VDC 9 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 5 VDC 9 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC Output current max. 200 mA 110 mA 85 mA 65 mA 100 mA 40 mA 35 mA 200 mA 110 mA 85 mA 65 mA 100 mA 40 mA 35 mA 200 mA 110 mA 85 mA 65 mA 100 mA 40 mA 35 mA Efficiency typ. 78 % 78 % 78 % 79 % 74 % 78 % 78 % 76 % 78 % 79 % 80 % 74 % 78 % 79 % 78 % 77 % 77 % 79 % 73 % 78 % 78 % Page 1 of 3 DC/DC Converters TES 1 Series Input Specifications Input current no load / full load 5 Vin models: 30 mA / 260 mA typ. 12 Vin models: 15 mA / 110 mA typ. 24 Vin models: 8 mA / 55 mA typ. 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. 0.3 A max. internal capacitors - 5VDC models: 2 % at 60 % load - other models: 2 % at 100 % load 1 % max. 1.2 % / 1 % change Vin see graphs below 120 mVpp max. 0.02 %/K limited 0.5 sec. max. 33 F max. - Operating - Storage - Case -40 C to +85 C -55 C to +125 C -105 C max. 3.3 %/K above 75C 95 % rel. H max. >2'000'000 h 1`500 VDC 40 pF typ. >1`000 Mohm 100 kHz typ. (frequency modulation) 30 % - Input/Output - Input/Output - Input/Output - Input variation - Load variation 1 Watt Surge voltage (1 sec. max.) Reverse voltage protection Input filter Output Specifications Voltage set accuracy Voltage balance (dual output models, balanced load) Regulation Ripple and noise (20 MHz Bandwidth) Temperature coefficient Short circuit protection Capacitive load General Specifications Temperature ranges Derating (convection cooling) Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217F, at 25C, ground benign) Isolation voltage (60sec) Isolation capacity Isolation resistance Switching frequency Frequency change over line and load Output voltage variation dependent on load (at nominal input voltage) 5 VDC models: other models: Deviation of Vout nom. Deviation of Vout nom. +10% +10% 0% max. typ. min. 0% max. typ. min. -10% 0 50% Load 100% -10% 0 50% Load 100% All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TES 1 Series Physical Specifications Case material Package weight Lead-free reflow solder process Moisture sensivity level (MSL) epoxy molding compound (flammability to UL 94V-0 rated) single output models: 1.7 g (0.04 oz) dual output models: 2.0 g (0.05 oz) as per IPC J-STD-020D as per IPC J-STD-033B MSL report level 2 1 Watt Outline and Solder Pad Dimensions TES 1 Single Output Models 8.0 (0.31) Pin-Out S 7.0 (0.28) Pin 1 3 7 8 14 Single -Vin (GND) +Vin (Vcc) -Vout +Vout *NC (0.01) (0.12) (0.10) (0.20) (0.54) 0.3 3.04 2.54 13.7 5.08 1.5 5.5 (0.06) 0-4 5.5 (0.216) 0.1 (0.216) 11.0 0.2 (0.43 0.008) 0.6 (0.02) 14 8 1.0 min. (0.04) * Pin to be isolated from circuitry 1 3 7 11.6 (0.49) 2.54 (0.10) 5.08 (0.10) TES 1 Dual Output Models 8.0 (0.31) (0.07) 1.6 Top view (0.28) Pin-Out S Pin 1 3 7 9 12 18 Dual -Vin (GND) +Vin (Vcc) Common -Vout +Vout *NC (0.01) (0.12) (0.10) (0.20) (0.10) 0.3 3.04 2.54 5.08 16.3 (0.64) 2.54 7.0 1.5 5.5 (0.06) 0-4 5.5 (0.216) 0.1 (0.216) 11.0 0.2 (0.43 0.008) 0.6 1.0 min. (0.04) 18 12 (0.07) Top view 1 3 7 9 11.6 (0.49) * Pin to be isolated from circuitry 1.6 2.54 (0.10) 5.08 (0.10) 2.54 (0.10) Dimensions in [mm], () = Inch Pin pitch tolerances: 0.10 (0.004) Other tolerances: 0.25 (0.01) Specifications can be changed any time without notice. Rev. 10/08 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com Page 3 of 3 |
Price & Availability of TES1-0511
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |